Integrity Software
Committed to Customer Satisfaction and Quality Products
Latest News
July 2010:
| 26th | History
of PC-Convey features now available Vista 32 and 64 bit versions of PC-IFD now available for download. |
September 2009:
| 14th | Vista 64 bit version of PC-Convey now available for download. |
April 2009:
| 15th | A minor bug (occasional incorrect sizing of Discharge Information screen) has been fixed with Version 7.22, which is now available for download. |
March 2009:
| 29th | An early version of PC-Culvert was inadvertently available for download for a brief period recently as PC-Convey. If you downloaded PC-Convey and saw a reference to PC-Culvert please do not use that version of the program and download the latest, corrected version (V7.21). We apologise for any inconvenience caused. |
February 2009:
| 15th 7th
|
Knowledge base
launched PC-Convey V7.20 now available. Download FREE Demo. Existing users of Version 7 or later can download this version and upgrade at no additional cost. - Program now contains an option to view or print a rating table for the current pipe on the Discharge Information screen. Program operates in Demo mode until Registered with Integrity Software. |
January 2009:
| 7th 2nd |
Domain name (integritysoftware.com.au) registered
PC-Convey V7.10 now available. Existing users of Version 7 or later were able to download this version and upgrade at no additional cost. Program now also runs on VISTA and contains the following improvements: - Load Existing Cross-section (File Open) procedure updated to access My Documents and other standard folders - Save Cross-section (File Save) procedure updated to access My Documents and other standard folders - Installation improved so that existing customers don't have to re-register program for minor upgrades - Improvements made to re-sizing of forms when screen is not maximised - Standardisation of screens improved (colors, input boxes etc.) Program operates in Demo mode until Registered with Integrity Software. |
March 2008:
| 1st | PC-IFD (Intensity Frequency Duration calculator) now
available. More details here or
download FREE Demo. Calculates rainfall intensities (and totals) for standard Average Recurrence Intervals from 1 year to 500 years, for a range of user-selectable durations between 5 minutes and 72 hours Uses the method described in Australian Rainfall and Runoff 1997, Book II. For a known rainfall intensity and duration you can also obtain an estimate of the Average Recurrence Interval of the event. |
January 2008:
| 31st 28th |
Free Version 7.05 upgrade CDs have now been forwarded
to all users with Company or Site Licenses. The demo version has now been upgraded to Version 7.05. Existing users of Version 7 or later can download this version and upgrade free. The screen version of the new User's Guide can also be downloaded separately. Please download and install the program first, followed by the User's Guide. After installing the new version of the program you may need to re-enter your Registration Code(s), but if so they will be the same as previously provided. |
| 26th | If you have any suggestions for program improvements, please send them via this new page. |
January 2007:
| 26th | DotNet framework link now available. |
| 20th | XP users can now download
PC-Convey to check out its features. The program will operate
in Demo mode until Registered with us. Users of Version 7 - 7.02 can also update to Version 7.03 via download for no additional cost. |
| 12th | To evaluate the latest version of PC-Convey (Version 7), please order the free Version 7 demo CD via the Feedback page. This CD contains a full version of the program that will work in demo mode until Registered with us. |
| 10th | Website updated. Option to download a Version 5 demo removed. |
| 3rd | We have been advised that in some earlier versions of the program the link to our website from within the program doesn't work. To fix this, please download this copy of our contacts.dat file and replace the existing one in the "program files\integrity software\pc-convey" folder on your c drive. |
Feedback?
We would greatly appreciate a few seconds of your time to provide some feedback, in particular, where you heard about the program or website.
Our policy is to not release to anyone any of the details you provide unless we are required to by law.
Please see our Feedback form.
Thank you.
September 2006:
Version 7 now available! We are pleased to announce that Version 7 is now available. We intend to eventually enable downloads from this site, however in the meantime, a free CD can be sent to you. This CD contains a full version of the program that will work in demo mode until Registered with us.
If you would like us to send you a free CD, please use the Feedback page.
May 2006:
The following features will be available in Version 7 of PC-Convey:
Written using Visual Studio, giving improved access to printer routines, amongst other things,
Support for long filenames and long folder names,
Introduction of calculations using the average depth instead of only using the maximum depth,
Option to write Output to File for subsequent manipulation (e.g. in a spreadsheet program),
Ability to paste (chainage, elevation) data from the clipboard,
Introduction of Safety Risk thresholds for (i) Depth, (ii) Velocity x Depth and (iii) Velocity calculations. User can set the threshold values, and Overbank Output screen displays values in red (and/or a warning message) when threshold is reached or exceeded,
Assistance provided on selecting the position of the Top of Bank Markers (in the User's Guide and within the program),
Comments provided on estimating the grade (in the User's Guide and within the program),
Option to have discharge units displayed in cumecs or litres per second,
Tooltips added to most buttons,
Print-Preview option,
Printouts improved (improved font, margin added, colour water surface and Top of Bank Markers),
Improved installation process,
Option added to enable suppression of folder path on print-outs,
User can now select default file extension from *.dat, *.con, *.pcc,
Background form no longer appears on taskbar, and program "ALT-Tab's" correctly with other applications,
Improved selection of Menu and Background colours,
Further enhancements made to some error-handling routines,
Other minor bug fixes and improvements.
The User's Guide will now be provided digitally by default. Hard copies may be ordered for $33 incl. GST.
Release has been delayed a little longer by the introduction of a few of the above-mentioned additional features, but we're getting closer!
January 2006:
Integrity Software launched. We have dropped the RDK from our business name, which will now be Integrity Software.
The Visual Studio version of PC-Convey will be Version 7.0, and will be released in the near future. Anyone purchasing a license to use PC-Convey after 1 January 2006 (prior to the release of Version 7.0) will receive a reduced-cost upgrade when it becomes available.
July 2005:
The release of PC-Convey V6 has been delayed because it has been decided to upgrade the program to Visual Studio rather than just to Visual Basic 6. At this stage it is difficult to predict when this work will be completed as there are a number of upgrade issues that require additional programming. Unfortunately this has also delayed development of our new web site as we concentrate on working through the issues involved with upgrading PC-Convey. Please contact us if you have any questions on this matter, and/or fill in the form below if you would like to be kept informed of progress.
6 March 2005:
If you downloaded our demo program on Sunday morning, 6 March 2005, you may have a problem running it. This has now been fixed, but you will need to download the demo again. We apologize for any inconvenience this may have caused.
2 March 2005:
Integrity Software
Mail:
PO Box 8003 Croydon Victoria Australia 3136
Fax:
International:
61 3 9876 6031 or from within Australia:
(03) 9876 6031